background image

Shrink Tunnel VC999 ST2/ST2 D 

Description of the machine 

 

 
 
 

 
 
Page 18/96 

Art. no. 593.767 

2009-11-12 

Control panel with touch screen display 

Operation occurs via the control panel at the front of the machine. Individual parameters can be dis-
played and their values edited on the touch screen. A keyboard appears on the screen to enter data. 
The START button, STOP button and the indicator lamp for the heater are located below the display. 
 

Electric cabinet  

The electric cabinet (26) is accessible from the rear of the machine. The power cord is routed into the 
electric cabinet from either the top or the bottom. 

 

Safety devices  

The machine is equipped with various safety devices. These safety devices help to protect operators 
against potential machine dangers. The safety devices include: 
 
- Lockable main switch (2) 
- EMERGENCY STOP button (8) 
 

Belt cartridge 

The belt cartridge (11) is the internal product transport unit. The belt cartridge can be accessed after 
opening the service door (15). The belt cartridge is fitted with a wire mesh belt and equipped with a pro-
tective roller at the both ends. The protective rollers provide finger pinch protection at the transition point 
to an optional infeed / outfeed roller conveyor. 
 
When the belt cartridge is installed, it is connected to the drive motor via a mechanical coupler. The wire 
mesh belt then rotates around the belt cartridge, conveying the products through the machine. 
 
The lower spray nozzles are integrated in the belt cartridge. Sieves (12) in and below the belt cartridge 
prevent contamination of the spray water. The sieves can be removed individually for cleaning. 
 

Infeed roller conveyor (optional) 

The infeed roller conveyor (19) is optionally available. It can be installed and de-installed without tools at 
both sides of the machine. 
 

The outfeed roller conveyor (optional) 

The outfeed roller conveyor (3) is optionally available. It can be installed and de-installed without tools at 
both sides of the machine. 
 

Steam extraction fan 

The steam extraction fan is accessible from the rear of the machine after removing the access cover 
(22). 
 

Содержание 593.767

































































































Отзывы: