vc999 593.767, Оригинальное руководство по эксплуатации

Страница: 77 / 96

Shrink Tunnel VC999 ST2/ST2 D
Repairs
2009-11-12
Art. no. 593.767 Page 77/96
13 Repairs
NOTICE
Maintenance and repair work must only be performed by trained specialists, as this work re-
quires specialist knowledge and special skills. Neither are provided in this Operating Manual.
If necessary, call in the VC999 Customer Service Department. You will find the Customer Service ad-
dress with the contact numbers in the section "Introduction".
CAUTION
Risk of injuries! Always ensure that the machine is switched OFF and disconnected from the
electrical supply before carrying out maintenance tasks!
Procedure
•
Switch off the machine at the main switch. Ensure that the main switch cannot be switched on acci-
dentally.
13.1 Repairs to electronics or control system
Do not under any circumstances carry out repairs to the electronics yourself. Consult the VC999 Cus-
tomer Service Dep. for this.
WARNING
Electrical hazard! Danger of death - electric shock! De-energize the machine before performing
any maintenance and lock it against unintentional restarting using a padlock on the main
switch. Only perform work on the power network if you are trained and authorized to do so.
13.1.1.1 Replace fuses
Procedure
•
Disconnect the machine from the power supply ac-
cording to the description in the section "Mainte-
nance".
•
Use the triangular socket spanner to open the
electric cabinet.
•
Replace the blown fuse or reset a tripped thermal
circuit breaker.
1 Decalcifying system fuse (optional)
2 24V fuse
Fig. 13/1