vc999 593.767, Оригинальное руководство по эксплуатации

Страница: 28 / 96

Shrink Tunnel VC999 ST2/ST2 D
Installation of the machine
Page 28/96
Art. no. 593.767 2009-11-12
7 Installation of the machine
Ensure that the machine is in a horizontal and stable position. If necessary, level out the machine ac-
cording to the description "Leveling the machine".
Casing
Some parts of the casing must be removed for installation and maintenance tasks. An open end span-
ner or one of the socket keys supplied with the machine must be used to remove the casing.
Electric cabinet
The triangular socket key (1) is required to open and
close the electric cabinet (Fig. 3/1, Pos. 26).
Access cover
The square socket key (2) is required for lock-
ing/unlocking the access cover (Fig. 3/1, Pos. 22).
Fig. 7/1
NOTICE
Keep the socket keys in a safe place.
7.1 Electrical installation
WARNING
Electrical hazard! Danger of death - electric shock! Only carry out electrical work if you are au-
thorized and appropriately trained and qualified. The Vacuum Packaging Machine should only
be connected by an approved electrician in accordance with local regulations!
WARNING
Risk of injuries due to moving parts, or risk of fatal electric shock!
Always switch off the machine before installation work. Before starting, switch off the main
switch and put on a padlock to prevent the machine being switched on inadvertently. Keep the
key out of the reach of other people!
Procedure
•
Also observe with the details in the section "Technical data" and the circuit diagrams in the section
"Circuit diagrams".
•
Check that the local operating voltage, frequency and fuse ratings comply with the data on the
name plate and with the technical data in this operating manual.