vc999 593.767, Оригинальное руководство по эксплуатации

Страница: 51 / 96

Shrink Tunnel VC999 ST2/ST2 D
Operation
2009-11-12
Art. no. 593.767 Page 51/96
9.6.1.1 Automatic warm-up
Use this mask to program the automatic warm-up of the spray
water according to the weekday and switch-on time. The warm-
up time is approx. 20-30 minutes.
Automatic decalcification (optional)
Fig. 9/26
The arrow buttons are only displayed when the machine is equipped with a decalcifying system (op-
tional) and the function "Decalcification pump" is switched on in the machine settings.
Programming
•
In the "Autostart" menu, press the clock and then enter the desired switch-on time.
•
Press the desired day(s) on which automatic warm-up should occur. The field of a selected day is
displayed inverted.
NOTICE
Only the spray water is warmed up during automatic warm-up. Production is not started.
9.6.1.2 Automatic decalcification (optional)
NOTICE
The function can only be programmed when the machine is equipped with a decalcifying sys-
tem (optional) and the function "Decalcification pump" has been switched on in the machine
settings.
Use this mask to program automatic decalcification of the water
tank and supply lines according to the weekday and switch-on
time. The decalcification process lasts approx. 30-40 minutes.
See the section "Decalcification mode" for more information
about the decalcification process.
Automatic warm-up
Fig. 9/27
Programming
•
In the "Automatic decalcification" menu, press the time and then enter the desired start time for the
decalcification process.
•
Press the desired day on which the decalcification process should be automatically started. The
field of the selected day is displayed inverted.