39
© Vallox Oy - All rights reserved
MAINTENANCE
CLEANING THE HEAT RECOVERY
CELL (USER)
Check that the heat recovery cell is clean roughly once a
year, or whenever the filters are being replaced. Clean by
washing as required.
IMPORTANT
If the unit has an enthalpy cell, it must not be washed. Only
aluminium or plastic cells can be washed.
To check and clean the heat recovery cell:
1. Disconnect the ventilation unit from the mains electricity
supply.
2. Lift the latch to open the door of the ventilation unit and
lift the door off.
CAUTION
The door is heavy.
3. Remove the filters (A, B, C).
4. Remove the sealing strip (E) above the cell in the
direction of the arrow.
5. Lift and pull the cell (D) out of the unit.
IMPORTANT
Handle the cell carefully! For example, do not lift the cell by
the layers. The cell layers are very thin and easily damaged.
6. If the cell is dirty, clean it by immersing it in warm water,
to which a small amount of a mild detergent has been
added.
7. Rinse the cell clean with a water spray. Do not use a
high-pressure cleaner.
8. When all the water has drained from between the layers,
reassemble the ventilation unit in the reverse order.
9. Close the door and ensure that the safety switch catch of
the door is engaged.
10. Plug the ventilation unit back into the mains. The heat
recovery cell has now been checked and cleaned.
D
E
D
E
Содержание Vallox TSK Multi 80 MV
