Vallox Vallox TSK Multi 80 MV Скачать руководство пользователя

Страница: 20 / 108

SETUP WIZARD

PROFILE SETTINGS

NOTE

By default, the At home profile uses the higher basic ventilation

fan speed. We recommend that this basic ventilation setting be

used with the At home profile. Once you have set the fan speed

for the At home profile, the fan speed for the Away profile will

by default be set to -30% of the At home profile fan speed.

We recommend that the default fan speed settings be used.

However, the settings can be changed as required.

At home and Away profiles

To set the ventilation settings of the profiles:

1. Use the

Plus

Minus

buttons to set the profile fan speed

as a percentage of the maximum output ratio.

2. The fan speed is now set for the profile.
3. Proceed to the next phase by selecting

Right arrow

4. Use the

Plus

Minus

buttons to set the desired supply air

temperature for the profile. You can adjust the temperature
in the range +10°C ... +25°C.

5. The profile supply air temperature is now set.
6. Proceed to the next phase by selecting

Right arrow

7. Use the

Plus

and

Minus

buttons to turn the automatic fan

speed control based on relative humidity of air on or off.

8. The automatic fan speed control, based on the relative

humidity of air, is now set.

9. Proceed to the next phase by selecting

Right arrow

10. Use the

Plus

and

Minus

buttons to turn the automatic fan

speed control based on carbon dioxide content on or off.

11. The automatic fan speed control, based on the carbon

dioxide level, is now set.

12. Select

13. Proceed to the settings of the next profile by selecting

Right

arrow.

NOTE

Once you have set the fan speed for the At home profile, the

fan speed for the Boost profile will by default be set to +30%

of the At home profile fan speed. It is recommended that this

fan speed setting be used for the Boost profile. However, the

setting can be changed as required.

Boost profile

The fan speed, supply air temperature, and the automatic fan

speed control (based on either relative humidity of air or carbon

dioxide level) is set for the Boost profile in the same way as for

the At home and Away profiles. The Boost profile also has a

timer setting.

TIP

You can browse the At home

profile settings with the Right

arrow button.

EXPERT SETTINGS

Содержание Vallox TSK Multi 80 MV










































































































Результаты поиска

Содержание Vallox TSK Multi 80 MV

Отзывы:

Похожие инструкции для Vallox TSK Multi 80 MV

Бренды по названию

Популярные бренды

Vallox Vallox TSK Multi 80 MV, Руководство пользователя

Результаты поиска

Содержание Vallox TSK Multi 80 MV

Отзывы:

Похожие инструкции для Vallox TSK Multi 80 MV

Бренды по названию

Популярные бренды