Vallox Vallox TSK Multi 80 MV Скачать руководство пользователя

Страница: 36 / 108

MAINTENANCE

CLEANING THE FANS (INSTALLER)

Check the cleanliness of the fans when servicing the filters

and the heat recovery cell. Clean the fans as required.

You can clean the fan blades with compressed air (wear

protective goggles) or by brushing them gently. Do not

remove or move the fan blade balancing weights.

IMPORTANT

The fans are extremely sensitive to external shocks. It is

recommended that the fans be cleaned in place, i.e. without
attempting to remove them. Remove the fan beds and

the bypass duct carefully in accordance with the below

instructions to prevent damage to the unit. The small size of

the unit restricts the space available for servicing.

IMPORTANT

Handle the fan blades carefully. Do not remove or move the

fan blade balancing weights.

Cleaning the supply air fan

The steps are mirrored for the left handed unit.

To remove and clean the supply air fan:

1. Disconnect the ventilation unit from the mains electricity

supply.

2. Unfasten the four screws to open the door of the unit.

3. Lift the door off.

4. Remove the extract air filter (C), the cell top bracket (E)

and the heat recovery cell (D), as described in sections

“Filters” and “Heat recovery cell”.

5. Remove the mounting screws of the fan bed (2 pcs).

6. Pull the bypass duct/filter stand package out of the unit

and turn to the right.

7. Remove the cable connector (black) of the fan and move

the supply air fan slightly to the right.

8. Remove the post-heating radiator connector. The post

heating radiator connector can be removed once the

supply air fan has been moved slightly to the right.

9. Tilt the supply air fan to the right and push the

connectors out of the way. Turn the fan 90° and tilt it

forward to pull it out of the unit.

10. The fan has now been removed for cleaning.

11. To reassemble the ventilation unit, follow the above

steps in reverse order.

12. Close the door. Ensure that the safety switch catch of the

door is touching the safety switch.

13. Plug the ventilation unit back into the mains.

The fan has now been checked and cleaned.

NOTE

The steps are mirrored for the left

handed unit.

Содержание Vallox TSK Multi 80 MV










































































































Результаты поиска

Содержание Vallox TSK Multi 80 MV

Отзывы:

Похожие инструкции для Vallox TSK Multi 80 MV

Бренды по названию

Популярные бренды

Vallox Vallox TSK Multi 80 MV, Руководство пользователя

Результаты поиска

Содержание Vallox TSK Multi 80 MV

Отзывы:

Похожие инструкции для Vallox TSK Multi 80 MV

Бренды по названию

Популярные бренды