Vallox Vallox TSK Multi 80 MV, Руководство пользователя

Страница: 60 / 108

60 60
MOUNTING ON THE WALL
NOTE
• Avoid mounting the unit on a hollow, echoing partition
wall or on a bedroom wall, or prevent the conduction of
sound.
• The minimum distance between the top of the unit and
the finished ceiling surface is 30 mm. Note that during
mounting the unit rises 10 mm higher than the final
height.
Mount Vallox 096 MV, 101 MV, Vallox 110 MV, and Vallox
145 MV on the wall with a mounting plate, as shown in the
adjacent figure. Make sure that the unit is horizontally level
after mounting.
MOUNTING ON THE CEILING
Vallox 096 MV, Vallox 101 MV, and Vallox 110 MV can be
equipped with an optional ceiling mount plate. To attach the
ceiling mounting plate:
• On rafter frames or other frame structure with M8 thread
bars so that they withstand the weight of the unit.
• Ensure that the installation plate is horizontally level, as
this determines the position of the unit.
Insulate the outdoor air and exhaust air duct against
condensation also between the unit and the ceiling
mounting plate.
Mounting the ceiling mounting plate
1. Fasten the thread bars on the rafter frames or other
frame structure, and screw the nuts onto the bars.
2. Lift the ceiling mounting plate in place.
3. Push a rubber damper and a washer onto each thread
bar, and ensure that they touch the bottom of the cups of
the plate (Vallox 096 MV).
4. Turn the nuts to make sure that the unit is horizontally
level.
5. Shorten the lower ends of the thread bars so that they
will be at no more than 10 mm from the lower surface of
the ceiling mounting plate.
CAUTION
The ventilation unit is very heavy. Do not perform this
procedure alone.
1
2
INS
TALLA
TION