manualshive.com logo in svg

Valco baby Vici TCD-3, Инструкция по эксплуатации

Поделиться
Скачать
Valco baby Vici TCD-3 Скачать руководство пользователя страница 41

37

Warranty

This Limited Warranty gives the Buyer specific legal rights, and a Buyer  
may also have other rights that vary from state to state. For a period of 365 calen-
dar days from the date of shipment, Valco Instruments Company, Inc. (hereinafter 
Seller) warrants the goods to be free from defect in material and workmanship 
to the original purchaser.  During the warranty period, Seller agrees to repair or 
replace defective and/or nonconforming goods or parts without charge for ma-
terial or labor, or, at the Seller’s option, demand return of the goods and tender 
repayment of the price.  Buyer’s exclusive remedy is repair or replacement of 
defective and nonconforming goods, or, at Seller’s option, the repayment of the 
price.

Seller excludes and disclaims any liability for lost profits, personal  
injury, interruption of service, or for consequential incidental or  
special damages arising out of, resuiting from, or relating in any  
manner to these goods

This Limited Warranty does not cover defects, damage, or nonconformity result-
ing from abuse, misuse, neglect, lack of reasonable care, modification, or the 
attachment of improper devices to the goods.  This Limited Warranty does not 
cover expendable items.  This warranty is VOID when repairs are performed 
by a nonauthorized service center or representative.  For information about 
authorized service centers or representatives, write Customer Repairs,  Valco 
Instruments Company, Inc, P.O. Box 55603, Houston, Texas 77255, or phone (713) 
688-9345.  At Seller’s option, repairs or replacements will be made on site or at 
the factory.  If repairs or replacements are to be made at the factory, Buyer shall 
return the goods prepaid and bear all the risks of loss until delivered to the fac-
tory.  If Seller returns the goods, they will be delivered prepaid and Seller will bear 
all risks of loss until delivery to Buyer.  Buyer and Seller agree that this Limited 
Warranty shall be governed by and construed in accordance with the laws of the 
State of Texas.

The warranties contained in this agreement are in lieu of all  
other warranties expressed or implied, including the warranties  
of merchantability and fitness for a particular purpose.

This Limited Warranty supercedes all prior proposals or representations oral or 
written and constitutes the entire understanding regarding the warranties made 
by Seller to Buyer.  This Limited Warranty may not be expanded or modified 
except in writing signed by the parties hereto.

Содержание Vici TCD-3











































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды