Vaisala Veriteq viewLinc 3.6, Руководство администратора

Страница: 99 / 122

Transfers and Transfer Schedules
viewLinc 3.6 Administrator Guide 89
4
From the Logger drop-down, choose the logger for which
you want to set the transfer.
5
Enter the email address to receive notification should the
transfer fail. You can choose an email address, a list of
email addresses separated by commas, or a distribution
list created on your mail server by the IT administrator.
6
Ensure correct mail server settings have been set in
“Configuring Email Settings” on page 61.
7
In the Schedule area, choose a transfer schedule interval
and start date and time. The Start time is a drop-down list
of 15-minute intervals. For example, you could set up a
data transfer every 7 days, beginning 2011-11-14 at
11:15 PM.
8
In the Destination area, choose the destination directory
for the saved .spl file (do not use a mapped drive path).
Sample directory paths could include: c:\logger_files or
\\<machinename>\<desination_dir>. We recommend you
use a directory on the viewLinc Host Server (for
example, c:\<destination_dir>).
Note:
During a data transfer, you may be prompted to
enter a valid username and password for saving
to the target directory or shared directory. You
also need to ensure that the account which
installed viewLinc (that is, which runs the view-
Linc Enterprise Server service) has sufficient
permissions to write to the directory where you
want the transferred data to go. For more on Ser-
vices with viewLinc, see “Appendix: FAQs &
Troubleshooting” on page 93.