Vahle VKS10 Скачать руководство пользователя

Страница: 91 / 99

MAINTENANCE

8.4.3

Result of cleaning

After cleaning, the conductor system should be free of loose and foreign particles. Repeat the process if nec-
essary.

TIPS AND RECOMMENDATIONS!

Due to external soiling and influence of particles (fine

dirt, liquids, wood chips, grease,

abrasion dust), we

recommend cleaning the floor regularly.

For mast assemblies, the steel construction (around

the feed terminal) should also be

cleaned regularly.

8.4.4

Special cleaning procedures

General information on wet cleaning

Large amounts of grease or soiling by other wet substances may have the following negative impact on the
conductor rail:

• Increase of transition resistance between graphite contact and conductor rail due to adhesive contamina-

tion of the surfaces (degrading contact)

• Influence on graphite contact lifetime

In case of strong soiling as described above, it is recommended to wet-clean the conductor rail using the fol-
lowing agents:

NOTICE!

The conductor rail must only be used with manufacturer-approved cleaners.

The cleaners are suitable for the relevant plastics

and usually do not degrade

them.

►

RIVOLTA S.L.X. 1000 (for conductor rails with oily

contamination)

►

Generally suitable for the food industry (NSF-K2

listed)

►

For excerpts from the safety data sheet please

see: “11 ”, or detailed

information at the following link:
www.rivolta.de

Cleaning (oil-contaminated conductor rail)

⚒

Rivolta S.L.X 1000

1. Spray cleaner directly on the oily (soiled) conduc-

tor rail.

2. No further treatment necessary. (Cleaner decom-

poses contamination and evaporates)

Rivolta S.L.X. 1000 (suitable for oily substances)

Содержание VKS10




































































































Результаты поиска

Содержание VKS10

Отзывы:

Похожие инструкции для VKS10

Бренды по названию

Популярные бренды

Vahle VKS10, Перевод оригинальной инструкции

Результаты поиска

Содержание VKS10

Отзывы:

Похожие инструкции для VKS10

Бренды по названию

Популярные бренды