Vahle VKS10 Скачать руководство пользователя

Страница: 16 / 99

SAFETY INSTRUCTIONS

2.9

Signage

The following symbols and information signs may be in the work area. They apply to the immediate environ-
ment of their location.

DANGER!

Danger of life due to electrical current!

Contact with live parts can result in life-threating injuries.

►

Make sure that the components are not live or in tension unauthorized approxima-
tion.

WARNING!

Hazard from illegible signs!

Over time, labels and signs may become soiled or otherwise illegible so that hazards
may not be recognized or necessary operating instructions may not be followed.

►

Always keep all safety, warning and operating instructions in easily legible condi-
tion.

NOTICE!

Observe instructions!

Use the identified device only after this documentation has been read and understood
in full.

Содержание VKS10




































































































Результаты поиска

Содержание VKS10

Отзывы:

Похожие инструкции для VKS10

Бренды по названию

Популярные бренды

Vahle VKS10, Перевод оригинальной инструкции

Результаты поиска

Содержание VKS10

Отзывы:

Похожие инструкции для VKS10

Бренды по названию

Популярные бренды