manualshive.com logo in svg

Vahle VKS10, Перевод оригинальной инструкции

Поделиться
Скачать
Vahle VKS10 Скачать руководство пользователя страница 58

 

COMMISSIONING

56

 

Mounting conductor system and adjusting connection joint

Install the conductor system straight and parallel to the crane runway.

The conductor system must be attached to each section with at least two hangers (support bracket or HRL
support profile).

Support bracket

Required tools:

⚒

Screwdriver for countersunk screw M6

Assembly steps:

1. Attach the hanger to the support brackets by clip-

ping or screwing (M6).

Remove the hanger by unscrewing it with a wrench
(SW13).

Step 1 HRL support profile

Assembly steps:

1. Place the hanger in the bore hole provided in the

support profile.

NOTICE!

Subsequent assembly applies both to the support
brackets and to the HRL support profiles.

►

The WCS laminate code rail mount (1) must al-
ways be at the top when arranged sideways.

Step 2

Assembly steps:

1. Insert the conductor system section into the

hanger from the front and then snap it into place.

Содержание VKS10




































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды