manualshive.com logo in svg

Vahle VKS10, Перевод оригинальной инструкции

Поделиться
Скачать
Vahle VKS10 Скачать руководство пользователя страница 81

 

MAINTENANCE

79

 

8.2

Contact line

For normal use, the conductor system requires only little maintenance. The following tasks should be per-
formed periodically however.

In case of damage to the conductor system, the associated components such as current collectors must be
inspected for damage.

Replacing the conductor system

Usually, the wear of the conductor system cannot be measured. If maintenance intervals are kept, then life-
times of 15-20 years and more can be achieved.

Interval

Service/monitoring

Personnel

daily

• Check safety equipment and operating behavior.

Operator

monthly

• Visual inspection of general condition. Replace damaged/de-

fective parts.

• Check mechanical and electrical connections, especially at the 

feed terminals; re-tighten if necessary.

• Remove small burns or discolorations on the contact surface by 

scouring with an abrasive pad (min. grit size 400). Do not use a 
powered brush. If removing the burns is not possible, then re-
place the relevant section of the conductor system.

Technician/electrical-
ly qualified person

quarterly

• Vacuum off any dust deposits (e.g. from graphite contacts) and 

other particles. Cleaning acc. to section 3.4.

Qualified persons

Содержание VKS10




































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды