![background image](http://html1.mh-extra.com/html/v2/zorus/zorus_manual_3127744023.webp)
ENGLISH
- 55 -
9 - LOADING THE DEFAULT PARAMETERS
If necessary, it is possible to restore all parameters to their
standard or default values (see the final summary table).
m
PLEASE NOTE: This procedure results in the loss of
all customised parameters, and hence it has been included
outside the
configuration menu, in order to minimise the likelihood of
it being run in error.
Loading of the default parameters is performed each time
the initialisation procedure is performed (even without
working time self-training).
The parameters acquired during initialisation are
maintained, even when the default parameters are loaded.
1.
Press and hold the
OK
key until the display shows
-dEF
2.
Release the
OK
key: the display shows
ESC
(only press the
OK
key if it is desired to exit this menu)
3.
Press the
i
key: the display shows
dEF
.
4.
Press the
OK
key: the display shows
no
5.
Press the
i
key: the display shows
Si
6.
Press the
OK
key: all parameters are overwritten with their
default values, the control units exits programming mode and
the display shows the control panel.
dEF.
ESC
-dEF
Si
no
Содержание ZORUS
