V-TEK TM-402, Руководство пользователя

Страница: 61 / 298

D292105.6a.fm Taper Tab
Chapter 3: Human Machine Interface 3-19
3. The third Taper Setup screen focuses on Sealer Settings . It will vary in appearance
depending on the type of sealer selected. In the example below, the selected Seal Type is
Heat .
A. The Seal Type button toggles between Heat seal and PSA seal.
The Dwell Time field is only active when heat seal is enabled. Dwell time refers to
the amount of time that the Heat Seal Shoes are in contact with the Cover Tape .
Enter the desired dwell time in milliseconds in this field.
The Manual Seal button activates the sealer to perform one seal.
B. The Set Point field allows the user to select the Heat Sealer set point, or target
temperature. Press the field to open the keypad, then enter the desired tempera-
ture in degrees Celsius.
The Measured field shows the current Heat Sealer temperature in degrees Cel-
sius.
Note: The TM-402 accommodates a wide range of carrier tapes and cover tapes. Set-
tings may vary from one tape product to another. The recommended starting point is 90°
C. The maximum recommended operating temperature is 160° C
. The temperature for
each seal shoe should be increased or decreased as needed after running a peel force
test.
Taper Screen 3
A
B