V-TEK TM-402, Руководство пользователя

Страница: 56 / 298

3-14 TM-403 User’s Guide
Job Tab D292105.6a.fm
13. Press the right Arrow Key to move to the next Job Wizard screen.
A. Enter the placement angle which was manually set in Step 10. The options are 0,
-90 and +90.
In the photo below, a part is shown at the pick position as viewed from the front of
the machine.
• If rotation is set at 0 , the part will be placed in the same orientation as it was
picked.
• If rotation is set at -90 , the part will be rotated 90 degrees clockwise prior to
placement.
• If rotation is set at +90 , the part will be rotated 90 degrees counter-clockwise
prior to placement.
A
Job Wizard Step 10
-90
0
+90
Rotation Options