V-TEK TM-402, Руководство пользователя

Страница: 101 / 298

D292105.16c.fm Connect Vision
Chapter 5: Setup 5- 3
Connect Vision
Note: The TM-402 vision system can be run with a computer or a Keyence IV-G
Monitor. These options are not included with the TM-402. They can be purchased
separately from V-TEK, Inc. or the user may provide their own computer.
System requirements for the vision computer follow:
• Operating system: Microsoft® Windows XP
TM
(32 bit), Windows Vista
TM
(32bit),
or Windows 7
TM
(32 or 64 bit)
• 128 MB RAM
• 1024 x 768 (96 DPI) or 1280 x 1024 (120 DPI display
• Ethernet port
If vision is enabled for a job, the vision computer/monitor must be connected to the Key-
ence IV-G Camera and the camera must be trained to inspect the part before the job can
be run.
Setup HMI
Follow the steps below to enable Vision Inspection on the TM-402.
1. On the TM-402 HMI, open the Taper Tab . Press the right Arrow button to advance
to the second Taper screen.Ensure the Camera State is set to Enabled.
2. Using the M12 ethernet cable which was provided with the TM-402 system,
connect the vision computer to the Keyence camera.
Step 1:
Vision
Setup
CONNECT