Utilimaster Corporation attempts to provide
information that is accurate, complete, and
useful. All information contained in this
manual is based on the latest product infor-
mation available at the time of publication.
However, because of the Utilimaster policy
of continual product improvement, Utilimas-
ter reserves the right to amend the informa-
tion in this document at any time without
prior notice.
This material is confidential and the prop
-
erty of Utilimaster. It is shared with your
company for the sole purpose of helping you
with the operation of the described equip-
ment.
Utilimaster makes no warranty of any kind
with regard to this material, including, but
not limited to, the implied warranties of
merchantability and fitness for a particular
purpose. Utilimaster shall not be liable for
errors contained herein or for incidental or
consequential damages in connection with
the furnishing, performance, or use of this
material.
Utilimaster expressly disclaims all respon-
sibility and liability for the installation, use,
performance, maintenance, and support of
third-party products. Customers are advised
to make their independent evaluation of such
products.
No part of this document may be photo-
copied, reproduced, or translated to another
language without the prior written consent
of Utilimaster.
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
87
For Assistance Call: 800-237-7806
Parts On-line:
https://parts.utilimaster.com
Reach—Body Service Manual
Fax: 574-862-7637
5. Remove two M6 screws on quarter fender.
6. Remove two M6 screws on outside edge of
headlight bezel.
7. Set fender aside.
Installation
1. Secure two M6 screws on outside of headlight
bezel.
2. Secure two M6 screws along top rail of the engine
compartment.
3. Secure one M6 screw in lower portion of A-pillar.
4. Secure three M6 screws behind A-pillar seal.
5.
Torque to 7–8 ft•lbs.
6. Install front fender cladding.
Install Front Fender Cladding.
Screw location in headlight bezel
Screw location in A-pillar
Screw location behind A-pillar seal
CAUTION: Discard ALL used fasteners and
replace with new. If using a fastener that does
NOT have preapplied thread lock, apply a
medium-grade liquid thread lock.
Screw location on quarter fender