![Utilimaster REACH Скачать руководство пользователя страница 153](http://html.mh-extra.com/html/utilimaster/reach/reach_service-manual_1065305153.webp)
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
useful. All information contained in this
manual is based on the latest product infor-
mation available at the time of publication.
However, because of the Utilimaster policy
of continual product improvement, Utilimas-
ter reserves the right to amend the informa-
tion in this document at any time without
prior notice.
This material is confidential and the prop
-
erty of Utilimaster. It is shared with your
company for the sole purpose of helping you
with the operation of the described equip-
ment.
Utilimaster makes no warranty of any kind
with regard to this material, including, but
not limited to, the implied warranties of
merchantability and fitness for a particular
purpose. Utilimaster shall not be liable for
errors contained herein or for incidental or
consequential damages in connection with
the furnishing, performance, or use of this
material.
Utilimaster expressly disclaims all respon-
sibility and liability for the installation, use,
performance, maintenance, and support of
third-party products. Customers are advised
to make their independent evaluation of such
products.
No part of this document may be photo-
copied, reproduced, or translated to another
language without the prior written consent
of Utilimaster.
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
153
For Assistance Call: 800-237-7806
Parts On-line:
https://parts.utilimaster.com
Reach—Body Service Manual
Fax: 574-862-7637
Removal
1. Turn off ignition and all lights.
2. Remove grille.
3. Remove two M6 screws in headlight bezel.
4. Remove two M4 screws in headlight bezel and set bezel aside.
5. Disconnect wire harness.
6. Remove four M8 bolts and set headlight aside.
Installation
1. Turn off ignition and all lights.
2. Secure headlight with four M8 bolts.
3.
Torque to 65–75 ft•lbs.
4. Connect to wire harness.
5. Secure headlight bezel with two M6 screws.
6.
Torque to 7–8 ft•lbs.
7. Secure headlight bezel with two M4 screws.
8. Install grille.
9. Adjust headlight.
Bolt locations
CAUTION: Discard ALL used fasteners and replace with new. If using a fastener that does NOT have
preapplied thread lock, apply a medium-grade liquid thread lock.
Screw location on headlight bezel