Utilimaster Corporation attempts to provide
information that is accurate, complete, and
useful. All information contained in this
manual is based on the latest product infor-
mation available at the time of publication.
However, because of the Utilimaster policy
of continual product improvement, Utilimas-
ter reserves the right to amend the informa-
tion in this document at any time without
prior notice.
This material is confidential and the prop
-
erty of Utilimaster. It is shared with your
company for the sole purpose of helping you
with the operation of the described equip-
ment.
Utilimaster makes no warranty of any kind
with regard to this material, including, but
not limited to, the implied warranties of
merchantability and fitness for a particular
purpose. Utilimaster shall not be liable for
errors contained herein or for incidental or
consequential damages in connection with
the furnishing, performance, or use of this
material.
Utilimaster expressly disclaims all respon-
sibility and liability for the installation, use,
performance, maintenance, and support of
third-party products. Customers are advised
to make their independent evaluation of such
products.
No part of this document may be photo-
copied, reproduced, or translated to another
language without the prior written consent
of Utilimaster.
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
39
For Assistance Call: 800-237-7806
Parts On-line:
https://parts.utilimaster.com
Reach—Body Service Manual
Fax: 574-862-7637
Overhead Panel
Removal
1. Remove M4 screws from visors.
2. Remove rear vision monitor.
3. Remove eight #8 Phillips head screws from speakers.
4. Disconnect wiring harnesses from speakers and set aside.
5. Remove scrivets from trim panel above both doors and overhead panel.
6. Set trim panels and overhead panel aside.
Installation
1. Secure trim panel above both doors and overhead panel with scrivets.
2. Connect wiring harnesses to speakers.
3. Secure speakers to panel with eight #8 Phillips head screws.
4.
Torque to 23–27 in•lbs.
5. Install rear vision monitor.
6. Secure visors with M4 screws.
CAUTION: Discard ALL used fasteners and replace with new. If using a fastener that does NOT have
preapplied thread lock, apply a medium-grade liquid thread lock.
Trim panel
Overhead panel