![Utilimaster REACH Скачать руководство пользователя страница 170](http://html.mh-extra.com/html/utilimaster/reach/reach_service-manual_1065305170.webp)
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
useful. All information contained in this
manual is based on the latest product infor-
mation available at the time of publication.
However, because of the Utilimaster policy
of continual product improvement, Utilimas-
ter reserves the right to amend the informa-
tion in this document at any time without
prior notice.
This material is confidential and the prop
-
erty of Utilimaster. It is shared with your
company for the sole purpose of helping you
with the operation of the described equip-
ment.
Utilimaster makes no warranty of any kind
with regard to this material, including, but
not limited to, the implied warranties of
merchantability and fitness for a particular
purpose. Utilimaster shall not be liable for
errors contained herein or for incidental or
consequential damages in connection with
the furnishing, performance, or use of this
material.
Utilimaster expressly disclaims all respon-
sibility and liability for the installation, use,
performance, maintenance, and support of
third-party products. Customers are advised
to make their independent evaluation of such
products.
No part of this document may be photo-
copied, reproduced, or translated to another
language without the prior written consent
of Utilimaster.
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
For Assistance Call: 800-237-7806
Visit us at:
www.utilimaster.com
170
Reach—Body Service Manual
E-mail:
Motor
Removal
1. Remove linkage assembly.
2. Remove the M8 nut to remove motor from linkage pivot shaft. Keep nut for reinstallation.
3. Remove the three screws to remove motor from mounting plate. Keep screws for reinstallation.
4. Set motor aside.
Installation
1. Secure the motor to the mounting plate with three screws.
2. Secure the linkage pivot shaft to the motor with nut.
3.
Torque to 17–21 ft•lbs.
4. Install the linkage assembly.
Bolt location on pivot shaft
Screw locations on mounting plate