![Utilimaster REACH Скачать руководство пользователя страница 27](http://html.mh-extra.com/html/utilimaster/reach/reach_service-manual_1065305027.webp)
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
useful. All information contained in this
manual is based on the latest product infor-
mation available at the time of publication.
However, because of the Utilimaster policy
of continual product improvement, Utilimas-
ter reserves the right to amend the informa-
tion in this document at any time without
prior notice.
This material is confidential and the prop
-
erty of Utilimaster. It is shared with your
company for the sole purpose of helping you
with the operation of the described equip-
ment.
Utilimaster makes no warranty of any kind
with regard to this material, including, but
not limited to, the implied warranties of
merchantability and fitness for a particular
purpose. Utilimaster shall not be liable for
errors contained herein or for incidental or
consequential damages in connection with
the furnishing, performance, or use of this
material.
Utilimaster expressly disclaims all respon-
sibility and liability for the installation, use,
performance, maintenance, and support of
third-party products. Customers are advised
to make their independent evaluation of such
products.
No part of this document may be photo-
copied, reproduced, or translated to another
language without the prior written consent
of Utilimaster.
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
27
For Assistance Call: 800-237-7806
Parts On-line:
https://parts.utilimaster.com
Reach—Body Service Manual
Fax: 574-862-7637
Rear
There are five pieces to the rear cladding; two lower pieces on either side of the door around the dock
bumpers, two upper pieces on either side of the door above the lower pieces, and the header above the
door. Each process describes the removal and installation of only one piece. Repeat the process on the
opposite side if necessary.
Lower Post Removal
NOTE: The dock bumpers do NOT need to be removed to replace the
lower post cladding.
NOTE: If not removing header, remove bottom two M6 screws in upper
post cladding.
1.
Remove five M6 screws in lower post cladding.
2. Slide lower post cladding from underneath upper post cladding and set
aside.
Lower Post Installation
1.
Secure lower post cladding with five M6 screws.
2.
Torque to 7–8 ft•lbs.
Upper post cladding screw
Lower post cladding
CAUTION: Discard ALL used fasteners and replace with new. If using a fastener that does NOT have
preapplied thread lock, apply a medium-grade liquid thread lock.