![Utilimaster REACH Скачать руководство пользователя страница 163](http://html.mh-extra.com/html/utilimaster/reach/reach_service-manual_1065305163.webp)
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
useful. All information contained in this
manual is based on the latest product infor-
mation available at the time of publication.
However, because of the Utilimaster policy
of continual product improvement, Utilimas-
ter reserves the right to amend the informa-
tion in this document at any time without
prior notice.
This material is confidential and the prop
-
erty of Utilimaster. It is shared with your
company for the sole purpose of helping you
with the operation of the described equip-
ment.
Utilimaster makes no warranty of any kind
with regard to this material, including, but
not limited to, the implied warranties of
merchantability and fitness for a particular
purpose. Utilimaster shall not be liable for
errors contained herein or for incidental or
consequential damages in connection with
the furnishing, performance, or use of this
material.
Utilimaster expressly disclaims all respon-
sibility and liability for the installation, use,
performance, maintenance, and support of
third-party products. Customers are advised
to make their independent evaluation of such
products.
No part of this document may be photo-
copied, reproduced, or translated to another
language without the prior written consent
of Utilimaster.
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
163
For Assistance Call: 800-237-7806
Parts On-line:
https://parts.utilimaster.com
Reach—Body Service Manual
Fax: 574-862-7637
Removal
NOTE: Refer to the instructions provided with the seat belt.
1. Remove 7/16-20 nut and bolt from buckle and discard buckle.
2. Remove cover from retractor and remove 7/16-20 nut and bolt.
3. Remove 7/16-20 nut and bolt from seat belt on the side of
the seat.
4. Remove 7/16-20 nut and bolt from seat belt on the B-pillar and
discard seat belt.
Installation
1. Secure seat belt at B-pillar with 7/16-20 bolt, washer and nut.
2. Secure seat belt to the side of the seat with 7/16-20 bolt, washer
and nut.
3. Secure retractor with 7/16-20 bolt.
4. Secure buckle on the side of the seat with 7/16-20 bolt and nut.
5.
Torque to 39–45 ft•lbs.
WARNING: When a seat belt is replaced, the entire assembly must be replaced.
Use the new mounting hardware furnished with the replacement belt. Do NOT use old hardware
when installing replacement seat belts.
The retractor must be located in the proper position on the bracket for the seat belt web to release
and function properly.
CAUTION: Discard ALL used fasteners and replace with new. If using a fastener that does NOT have
preapplied thread lock, apply a medium-grade liquid thread lock.
Bolt location on buckle
Retractor cover
Bolt location on retractor
Bolt location on B-pillar