![Utilimaster REACH Скачать руководство пользователя страница 33](http://html.mh-extra.com/html/utilimaster/reach/reach_service-manual_1065305033.webp)
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
useful. All information contained in this
manual is based on the latest product infor-
mation available at the time of publication.
However, because of the Utilimaster policy
of continual product improvement, Utilimas-
ter reserves the right to amend the informa-
tion in this document at any time without
prior notice.
This material is confidential and the prop
-
erty of Utilimaster. It is shared with your
company for the sole purpose of helping you
with the operation of the described equip-
ment.
Utilimaster makes no warranty of any kind
with regard to this material, including, but
not limited to, the implied warranties of
merchantability and fitness for a particular
purpose. Utilimaster shall not be liable for
errors contained herein or for incidental or
consequential damages in connection with
the furnishing, performance, or use of this
material.
Utilimaster expressly disclaims all respon-
sibility and liability for the installation, use,
performance, maintenance, and support of
third-party products. Customers are advised
to make their independent evaluation of such
products.
No part of this document may be photo-
copied, reproduced, or translated to another
language without the prior written consent
of Utilimaster.
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
33
For Assistance Call: 800-237-7806
Parts On-line:
https://parts.utilimaster.com
Reach—Body Service Manual
Fax: 574-862-7637
A-Pillar
Removal
NOTE: On driver’s side, remove four M6 screws from
A-pillar grab handle prior to removing A-pillar.
1. Remove seven M6 scrivets from A-pillar.
2. Set A-pillar aside.
Installation
1. Secure A-pillar with seven M6 scrivets.
NOTE: On driver’s side, secure grab handle to A-pillar with four M6 screws and torque to
7–8 ft •lbs.
Brake Panel
Removal
1. Remove three #8 Phillips head screws from brake panel.
2. Remove brake panel and set aside.
Installation
1. Secure brake panel to dash with three #8 Phillips head screws.
2.
Torque to 23–27 in•lbs.
CAUTION: Discard ALL used fasteners and replace with new. If using a fastener that does NOT have
preapplied thread lock, apply a medium-grade liquid thread lock.
A-pillar
Brake panel
CAUTION: Discard ALL used fasteners and replace with new. If using a fastener that does NOT have
preapplied thread lock, apply a medium-grade liquid thread lock.