![Utilimaster REACH Скачать руководство пользователя страница 18](http://html.mh-extra.com/html/utilimaster/reach/reach_service-manual_1065305018.webp)
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
useful. All information contained in this
manual is based on the latest product infor-
mation available at the time of publication.
However, because of the Utilimaster policy
of continual product improvement, Utilimas-
ter reserves the right to amend the informa-
tion in this document at any time without
prior notice.
This material is confidential and the prop
-
erty of Utilimaster. It is shared with your
company for the sole purpose of helping you
with the operation of the described equip-
ment.
Utilimaster makes no warranty of any kind
with regard to this material, including, but
not limited to, the implied warranties of
merchantability and fitness for a particular
purpose. Utilimaster shall not be liable for
errors contained herein or for incidental or
consequential damages in connection with
the furnishing, performance, or use of this
material.
Utilimaster expressly disclaims all respon-
sibility and liability for the installation, use,
performance, maintenance, and support of
third-party products. Customers are advised
to make their independent evaluation of such
products.
No part of this document may be photo-
copied, reproduced, or translated to another
language without the prior written consent
of Utilimaster.
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
For Assistance Call: 800-237-7806
Visit us at:
www.utilimaster.com
18
Reach—Body Service Manual
E-mail:
14. Thoroughly clean the repair area with alcohol
or acetone.
15. Coat all four sides of the plug and the hole
with resin, place in the opening, and secure
with clamps.
16. Carefully center the plug in the opening and
secure with clamps or fasteners.
17. Bond the perimeter of the plug to the body
with resin and fiberglass matting.
18. Allow resin to dry.
19. Remove temporary support and apply resin to
any low spots and holes.
20. Sand with 80–120 grit sandpaper.
21. Add more resin and matting and repeat
sanding until surfaces are smooth.
22. Sand with 120–240
wet
sandpaper.
23. Repair gelcoat.
CAUTION: The replacement plug needs to be mounted flat and flush with the body surface.
Bond plug in place with resin and matting.