![Utilimaster REACH Скачать руководство пользователя страница 72](http://html.mh-extra.com/html/utilimaster/reach/reach_service-manual_1065305072.webp)
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
useful. All information contained in this
manual is based on the latest product infor-
mation available at the time of publication.
However, because of the Utilimaster policy
of continual product improvement, Utilimas-
ter reserves the right to amend the informa-
tion in this document at any time without
prior notice.
This material is confidential and the prop
-
erty of Utilimaster. It is shared with your
company for the sole purpose of helping you
with the operation of the described equip-
ment.
Utilimaster makes no warranty of any kind
with regard to this material, including, but
not limited to, the implied warranties of
merchantability and fitness for a particular
purpose. Utilimaster shall not be liable for
errors contained herein or for incidental or
consequential damages in connection with
the furnishing, performance, or use of this
material.
Utilimaster expressly disclaims all respon-
sibility and liability for the installation, use,
performance, maintenance, and support of
third-party products. Customers are advised
to make their independent evaluation of such
products.
No part of this document may be photo-
copied, reproduced, or translated to another
language without the prior written consent
of Utilimaster.
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
For Assistance Call: 800-237-7806
Visit us at:
www.utilimaster.com
72
Reach—Body Service Manual
E-mail:
Winding counterbalance spring
Right Hand
(Curbside)
Left Hand
(Roadside)
Chalk mark
Support Bracket
Chalk Mark
(Compressed Spring)
Winding Bars (See
Dimensions Table)
Locking Pliers
Against Ceiling
Rotate Toward the
Ceiling to Compress Spring
Spring Winding Plug
Cable
Door Top Panel
Cable Drum
Protective
Flat Stock
Setscrew
NOTE: This vehicle was designed
using English (S.A.E.) measurements.
Utilimaster provides metric
conversion equivalents as a courtesy,
but Utilimaster does not warrant
metric values given in this
manual.
Winding Bar Dimensions
Door
Manufacturer
Diameter
(Inches)
Diameter
(Millimeters)
Approximate
Length
TODCO
1/2"
127 mm
18" or 46 cm
Whiting
3/8"
95.2 mm