Rendering Machine V2______________________________________________________________________________________
8
2
General indications
2.1
Basic safety indications
This instructions manual contains the most important indications to manage the
V2
with full safety. The most important points are marked with special symbols.
They have the following meaning:
ATTENTION!
ATTENTION!:
This symbol means that a direct danger exists for life and health
of people because of mechanical reasons.
ATTENTION!
: This symbol means that a direct danger exists for life and health of
people because of electric power.
2.2
Obligations
The manual of instructions always has to be kept near the machine and also it is important to have the
local regulations about the prevention of accidents and the protection of the environment handy. These
documents always have to be taken into account.
In addition to it, it will also be necessary to have the domestic regulation for the country in which the
machine will be used.
The V2 must only be used:
• For the use according to the established
• In a perfect and secure technical state
The damages that can affect the security have to be eliminated immediately.
The V2 is a machine which has been certified for road transport, that is why it is subjected to the
currently effective traffic norms. That bears the obligation of taking an official registration and the
obligation of carrying out an inspection according to the effective legislation.
2.3
Warranty and responsibility
Please take into account the "General conditions of sale and delivery". These conditions are available
for you after conclusion of the contract. In the event of damages to people or materials, demands that
are derived of the guarantee or responsibility will be excluded if these damages can be attributed to the
following causes:
• an inadequate use of the machine
• inappropriate assembly, operation, handling or maintenance of the machine.
• not taking in consideration the indications of the manual of instructions about the transport,
storage, assembly, starting up, operation and maintenance (this refers , most of all, for the 1
st
.
inspection after 50 hours of operation). All the reparations to the machine have to be carried out for an
authorized shop or by UTIFORM.
Supplied by :- Markham (Sheffield) Ltd - Tel:- +44 (0)1909 730861 - www.markham-sheffield.co.uk