Utax P-C2160DN, Руководство пользователя

Страница: 109 / 226

4-41
Using the Operation Panel
Binding Modes
Binding refers to the manner in which printed pages of paper are joined
together (by gluing, stitching, etc.) in book form. The two possible types
of binding are: long-edge binding, in which pages are joined together
along their long edge; and short-edge binding, in which they are joined
together along their short edge. In selecting a binding type, you must also
consider the orientation of the printed page. You can use long-edge or
short-edge binding with either landscape or portrait printing.
Depending on the binding type and print orientation, the duplexer
provides four types of binding. These are: (1) portrait, long-edge, (2)
portrait, short edge, (3) landscape, long-edge, and (4) landscape, short-
edge. The figure below shows these binding methods.
1
Press

while
Print Settings >
is displayed.
2
Press  or  repeatedly until
>Duplex
appears.
3
Press [OK] . A blinking question mark (
?
) appears.
4
Press  or  to display the desired binding mode. The message
display toggles through the following:
Off
(default)
Short edge bind
Long edge bind
5
Press [OK] .
6
Press [MENU] . The display returns to
Ready
.
(1)
(3)
(2)
(4)
Portrait,
long-edge
Landscape,
long-edge
Portrait,
short-edge
Landscape,
short-edge
>Duplex
? Off