DS1098-019A
23
3.4.2.2
Record Schedule
This function is used to program recording for all days of the week in continuous mode and upon alarm for each channel. Select
the recording mode (Normal, Motion, Alarm) and then set the recording time on the grid.
•
Channel
: this option is used to select a desired channel.
•
Normal
: to record continuously (24h)
•
Motion
: to record in the event of a motion detection alarm
•
Alarm
: to record in the event of an external sensor alarm
•
Copy
: this is used to copy the current channel settings to another or to all other channels.
.
Click on the [Save] button once the program is completed.
Alternatively, click on the Default button to use the system default parameters.
NOTE
:
No colour means no recording, red indicates alarm recording, yellow indicates motion detection alarm and green indicates
normal recording. It is possible to use Alarm (if available), Motion and Normal Record modes at the same time and to
search for the recording file by setting the “All Record” filter.
3.4.2.3
Main Stream
Read the description under the following figures for this menu page:
•
Channel
: this option is used to select a desired channel.
•
Resolution:
4K,
4Mpx, 3Mpx, 1080P, 960P and 720P resolutions are supported.
•
FPS (Frame Rate):
the following range values can be selected:
PAL: 1-25 f/s; NTSC: 1-30 f/s. The Frame Rate
values may vary according to the NVR model.
•
Video Encode Type: (if available)
this is used to set the IP channels to H.264 or H.265.
•
Bit Rate Control:
Constant Bit Rate (CBR) or Variable Bit Rate (VBR) can be set.
•
Bit Rate Mode:
select Predefined to select the listed Bit Rate values or User Defined to enter a bit rate value
manually.
•
Bit rate:
the data
bit rate
can be selected in the drop-down menu.
•
Audio:
check this option to make the system record video and audio streams at the same time.
NOTE
:
In CBR Predefined Bit Rate Mode, the bit rate changes automatically according to the frame rate value selected for each
IP channel with protocols other than ONVIF.
