DS1098-019A
27
Press
[Save]
to save the changes.
IMPORTANT NOTE
:
The DNS fields must be filled in correctly for the DDNS system to work properly.
2.
Port configuration
At this point, the external ports on the router must be sent to the NVR. This function is usually called “Port-forwarding”
or “Virtual Server” in the router configuration menu. The ports set on the router must correspond to those of the NVR.
a)
Set different values on the NVR if the default ports of the NVR (80, 9000, 18600) are already in use in the
port-forwarding table of the router.
b)
Set the ports on the NVR and forward them to the router. This can be done in two different ways:
Manual mode: if the UPnP function is supported and enabled on the router, simply enable the
function also on the NVR at the bottom of the “Menu
Network”
page (see below).
