DS1098-019A
52
•
IPC Upgrade:
the IPC can be updated by means of the connected NVR. Decompress the IPC update file and
copy the *.sw file from the NVRupgrade director into the root directory of the U flash drive, as shown in the figure
below —> Insert the U flash drive in the USB port of the NVR —> Select the IPC to upgrade —> Click on
Upgrade to start upgrading the IPC.
Note
:
IP cameras with ONVIF protocols cannot be upgraded.
Do not extract the USB flash drive or disconnect the power supply during the upgrade. The system will be
automatically restarted at the end of the upgrade. The update will end after approximately 5 minutes. It is
advisable to
load the default parameters
after the upgrade. The automatic maintain function will become
effective only after the NVR returns to Preview mode, without performing any operation during the set automatic
maintenance time.
•
Load Settings:
loads the parameters contained in the removable storage device to the NVR.
•
Save Settings:
saves the parameters set by the NVR user on the removable storage device.
IPC Load Default:
loads the IP camera default settings (operation not possible for an IP camera with an ONVIF
protocol).
•
Reboot IPC:
restarts the IP camera (operation not possible for an IP camera with an ONVIF protocol)).
