Urma Digiset 5, Руководство пользователя

Страница: 49 / 54

digiset 5
Urma AG, Switzerland www.urma.ch page 49
8.3.2.5 "Line 1 - Point X" measurement (L1 - PX)
The vertical axis is touched at one point and shown as a red
measuring line. Line 1 runs through the cross hairs origin point.
The contour is aligned to its optimum level when the pointers on
both adjustment bars are exactly in the middle.
8.3.2.6 "Line 2 - Point X" measurement (L2 - PX)
The maximum X deviation and line 2 are determined. The re-
sults then show the intersection point.
8.3.2.7 "Line 1 - Point Z" measurement (L1 - PZ)
The maximum Z deviation and line 1 are determined. The re-
sults then show the intersection point.
8.3.2.8 "Line 2 - Point Z" measurement (L2 - PZ)
The horizontal axis is touched at one point and shown as a red
measuring line. Line 2 runs through the cross hairs origin point.
The contour is aligned to its optimum level when the pointers on
both adjustment bars are exactly in the middle.
Punkt X
Linie 1
Linie 2 Punkt X
Punkt Z
Linie 1
Linie 2 Punkt Z