digiset
5
Urma AG, Switzerland www.urma.ch
page 38
7.3 Tool list
You access this operating mode using the following menu steps:
Main menu
Sub-menu 1
System
Ö
Tool list
After selecting this operating mode the measured tools are listed in a window as a
table with a consecutive number, information on the tool reference, the T number
(tool number) and the tool name. In addition the buttons shown have the following
functions:
Edit
The entries on the tool selected in the tool list can be chan-
ged.
New
The tool selected in the tool list will be measured again.
Delete
The tool marked in the selection list is deleted after it has
been confirmed with the security query.
Print list
The tool list will be printed using the interface defined in the
"Output format / Series" menu item after a list number has
been allocated in another window.
Delete all
The whole tool list will be deleted after the security query
has been confirmed.
Close
The tool list is closed.
