- 63 -
© 2019 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS852Plus User’s Manual
3.4.10.3 Data Matrix Code Page
Data Matrix Code pages define the mapping of character codes to characters.
If the data received does not display with the proper characters, it may be
because the bar code being scanned was created using a code page that is
different from the one the host program is expecting. If this is the case, scan
the bar code below, select the code page with which the bar codes were
created
(see ISO 2022/ISO 646 Character Replacements ),
and scan the value
and the Save bar code from the
. The data characters
should then appear properly.
Data Matrix Code Page
3.4.11 MaxiCode
MaxiCode On
Default All MaxiCode Settings
MaxiCode Off*
3.4.11.1 MaxiCode Message Length
Scan the bar codes below to change the message length. Refer to
for additional information. Minimum and Maximum lengths
= 1-150. Minimum Default = 1, Maximum Default = 150..
Minimum Message Length
Maximum Message Length
