Unitech MS852Plus Auto Switching Скачать руководство пользователя страница 73

Страница: 73 / 99

- 58 -

unitech is a registered trademark of unitech Electronics Co., Ltd.

MS852Plus User’s Manual

3.4.7.3 GS1 Emulation

The scanner can automatically format the output from any GS1 data carrier to

emulate what would be encoded in an equivalent GS1-128 or GS1 DataBar

symbol. GS1 data carriers include UPC-A and UPC-E, EAN-13 and EAN-8,

ITF-14, GS1-128, and GS1-128 DataBar and GS1 Composites. (Any

application that accepts GS1 data can be simplified since it only needs to

recognize one data carrier type.)

If GS1-128 Emulation is scanned, all retail codes (U.P.C., UPC-E, EAN8,

EAN13) are expanded out to 16 digits. If the AIM ID is enabled, the value will

be the GS1-128 AIM ID, ]C1.

If GS1 DataBar Emulation is scanned, all retail codes (U.P.C., UPC-E, EAN8,

EAN13) are expanded out to 16 digits. If the AIM ID is enabled, the value will

be the GS1-DataBar AIM ID, ]em.

If GS1 Code Expansion Off is scanned, retail code expansion is disabled, and

UPC-E expansion is controlled by the UPC-E0 Expand setting.

If the AIM ID is enabled, the value will be the GS1-128 AIM ID, ]C1.

If EAN8 to EAN13 Conversion is scanned, all EAN8 bar codes are converted

to EAN13 format. Default = GS1 Emulation Off.

GS1-128 Emulation

GS1 Emulation Off *

GS1 Code Expansion Off

GS1 DataBar Emulation

EAN8 to EAN13 Conversion

Содержание MS852Plus Auto Switching


































































































Результаты поиска

Содержание MS852Plus Auto Switching

Отзывы:

Похожие инструкции для MS852Plus Auto Switching

Бренды по названию

Популярные бренды

Unitech MS852Plus Auto Switching, Руководство пользователя

Результаты поиска

Содержание MS852Plus Auto Switching

Отзывы:

Похожие инструкции для MS852Plus Auto Switching

Бренды по названию

Популярные бренды