Uni-Line SmartSense SMART 3000, Руководство по установке

Страница: 10 / 68

10
The switches must be set correctly for each system configuration. Follow these
steps to create your Plan:
1. Review the settings in Table 1.
2. Read the following switch descriptions.
3. Mark or write down the switch positions that you will use.
4. Locate the wiring diagram that accurately describes your equipment, starting
on page 18.
5. Review the switch settings next to the wiring diagram. If there are any
differences between that list and your selections, review your list. Be certain
you have the correct wiring diagram and choices for switch positions.
The ModBus and sensor terminals will be described later in this manual.