Uni-Line SmartSense SMART 3000, Руководство по установке

Страница: 33 / 68

33
the SMART 3000 will enter Unoccupied mode where the guest’s temperature
and mode will be replaced with installer pre-set values. Should movement be
detected within the installer pre-set seek time the SMART 3000 will LOCK into
Occupied mode. It will no longer rely on continued movement within the room to
remain in Occupied mode. Next time the door is opened and then closed again,
the SMART 3000 will again begin its occupancy detection process.
NOTE:
Even when the SMART 3000 is in Unoccupied mode it will continue to use
the PIR input to determine room occupancy. For example - a couple may
be staying in the room and one leaves the room leaving the other asleep
in bed. As the door closes, the SMART 3000 will seek movement and when
none is found it will enter Unoccupied mode. As the sleeper wakes and
then moves the SMART 3000 will automatically re-enter Occupied mode
even though it may have been some time since the door was closed.
Installer option PIR Input Delay sets the PIR mode (On or Off) and the seek time
value (1 to 15 minutes).
Manual Occupancy Input
The DI (Digital Input) and Com 0 to 10 terminals within the SMART 3000 can be
used to instantly force the SMART 3000 into Unoccupied mode. This input can be
wired to a simple card reader or other 3rd party system that may be pre-installed
for room occupancy detection.