Uni-Line SmartSense SMART 3000, Руководство по установке

Страница: 27 / 68

27
NOTE:
If the thermostat is OFF, touch the thermostat display to turn it ON.
Set Temperature
Adjust the target temperature with the Up or Down button. The range of
temperature adjustment can be limited with the installer setting Heat and Cool
limit setting. See page 40.
Fan
Single fan speed mode (Sw1=Off). See Table 1 DIP Switch Settings, page 11.
Press the Fan button to cycle between auto fan and continuous fan mode.
Three fan speed mode (Sw1=On). See Table 1 DIP Switch Settings, page 11.
Press the Fan button to cycle between low, medium, high and auto fan speeds.
Press and hold the Fan button to turn the fan ON continuously.
NOTE:
Option 36 in the Installer Menu permits you to set the SMART 3000 to
automatically reset the indoor fan to Automatic Mode (cycle ON and OFF
with heating and cooling) every time the thermostat is turned OFF and
then back ON if desired.