Uni-Line SmartSense SMART 3000, Руководство по установке

Страница: 7 / 68

7
Mounting the SMART 3000 Thermostat
IMPORTANT:
The SMART 3000 can only be as accurate as the onboard
temperature sensor, or its optional remote temperature sensor(s)
permit. The SMART 3000 should be mounted in a location that
is typical of the ambient room temperature. Do not install near
the floor, in a draft, behind a door, or on a non-insulated, exterior
wall. Install the SMART 3000 away from exposure to sunlight and
four to five feet (1.2 to 1.5 m) above the floor.
Figure 1
• Locate the slot on the housing at the bottom. Take note of the hinge points
and the connection between the two halves.
• Insert a screwdriver or coin into the slot and twist. This will separate the
two halves.