Uni-Line SmartSense SMART 3000, Руководство по установке

Страница: 8 / 68

8
• Continue to swing the top half upward. This will release the tabs holding the
top half in place.
• Pull the control wires through the large opening in the base plate.
• Position the base plate on the wall and attach it with appropriate fasteners
(two screws with drywall anchors are supplied). The base plate should be
visibly level.
• Block any holes where wires are pulled through a wall opening. This will
prevent drafts from entering the back of the thermostat.
Do not use
these holes for
mounting.
Figure 2
If this installation will be using ModBus controls or remote sensors, be certain to
include the proper wires to make those connections.