Ulvac RFS-13100F Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 74

Ulvac RFS-13100F Скачать руководство пользователя страница 3

RF Power Supply and Matching Box

Introduction

ii

1. Safety precautions

1

Most accidents are attributed to carelessness during operation, inspection, maintenance, or
repair.
Failure to comply with the safety precautions or neglecting to anticipate danger causes
accidents to happen more easily. Accidents can be prevented before they happen by
anticipating potentially dangerous situations at an early stage.

2

Accidents involving injuries are caused by erroneous operation or inadequate maintenance
and inspection work.
Never try to operate the product before carefully reading and understanding the operation,
inspection and maintenance sections.

3

Warnings and precautions about safety are listed in this manual and on the product's warning
labels.
Ignoring these warnings and precautions may lead to injury or loss of life, so use caution.

4

Supervisors, operators, and maintenance personnel should read this manual before
operation or maintenance. Only those who know how to handle the product and have
received training should perform the appropriate work on the product using the correct
techniques and tools.

«
1
2
3
4
5
...
»

Содержание RFS-13100F











































































Отзывы:

Нет отзывов