Ulma TFS100, Руководство пользователя, Страница: 61 / 85

-3- SCREEN PP45
5/29
Present. Current temperature for the area.
Ref.: Default temperature with a maximum of 200
P
0
P
C.
Alarm. Temperature range at which the temperature error will appear outside of the
range. If the current temperature is outside this range the machine will not be able
to start unless the temperature error is deactivated. Since the machine is not turned
on, the temperature error will not make any sense. The maximum alarm may not
exceed 25ºC.
Forming. The air time to fomr the package.
Heating. The time the film is heated, either in the forming station for a flexible film.
Forming ventilation. The time necessary to void the forming air, before opening the
mould. If the time is not properly entered, it may produce noises while opening the
forming mould.
Forming form manual. The forming tool lifts. If pressed again it lowers. This button
only works with a stopped machine.
Temperature Alarm . Temperature margins after which an out-of-range alarm will
sound. If the current temperature is outside this range, the machine will not be able
to operate unless the temperature errors are not activated. If it is not activated, the
machine will not take into consideration the temperature errors.
1.4 LOAD AREA
Depending on the configuration of the machine, some of the following
parameters may not be changed or displayed.
Load area zone have these activations:
Codifier. Activation of the codifier (only if machine includes codifier option).
Codifier in multiple pitch. With this button, we activate the codifier in multiple pitch (if
the machine has an optional codifier).
Dosifier . Activation of dosifier (only if machine includes dosifier option).