
-2- USE INSTRUCTIONS TFS 100
35/38
7.5 FILTROS
The air used in the machines TFS must be oil free. This is why we recommend
to check the compressed air installation (there must be a filter to eliminate moisture
and air impurities) before connecting the machine.
The air filter at the inlet of the machine eliminates small impurities and moisture
in the air, but the air must be dry and filtered at
the outlet of the compressor.
The inlet filter of the machine must be bled every time it is full with water.
When forming is made with air, air moisture can damage the pneumatic circuit
and air impurities can make the tray look dirty.
For all these reasons, filter maintenance must be as follows:
I Periodicity
Function
Indication
Every 8 hours
-Check if adjustment is necessary
-Check and change filter if
necessary
Pressure 6-7kg/cm
2
and between
1500-2000 l/min
Every 1000 hours
Change filter
Содержание TFS100
