
-2- USE INSTRUCTIONS TFS 100
38/38
We recommend not to take off the protection
sheet during coil transport. We also recommend to use
a forklift truck or similar device for coil transport. Be
careful that the system you chose does not damage
the film.
8.2 INSERTION OF PRODUCTS IN TRAYS
After forming the tray, the next step is to insert the product. This can be done
automatically or manually and the positioning will be important for a correct sealing to
be achieved later.
The product must not stick out of the tray, as this could damage the welding
fitting and the cutting device.
Incorrect!
Correct!
To achieve a correct sealing, tray dimensions must be adapted product
dimensions.
Incorrect!
Correct!
Products with edges which could damage the tray must be situated
appropriately so that these edges do not damage the tray.
Incorrect!
Correct!
Products with strange shapes must be packed in trays with the same shapes.
Incorrect!
Correct!
Products must be correctly placed in the tray and welding areas must be kept
clean in order to achieve a correct welding, otherwise, product conservation could be
threatened. This is very important when working with products containing starch or
fibre, meat, etc.
Содержание TFS100
