manualshive.com logo in svg

Ulma TFS100, Руководство пользователя, Страница: 23 / 85

Поделиться
Скачать
Ulma TFS100 Скачать руководство пользователя страница 23

 

-2- USE INSTRUCTIONS TFS 100

 

 

7/38 

 

3 VERIFICATIONS 

BEFORE 

INSTALLATION 

 

3.1 TRANSPORT INSTRUCTIONS 

For the transport and installation of the machine, you must prepare a forklift 

truck (remember the weight of the machine). 

Precautions to be taken: 

-Lift the machine by its centre of gravity, which may not be the centre of the 

machine. 

-When you lift the machine with the forklift truck, do so by its front part 

(opposite to the electrical cabinet). Verify the existence of components sticking out 
of the lower part of the machine. 

-Do never lift the machine by its ends or extensions.  

 

-Always be extremely careful when lifting and transporting the machine. 

-Approximate weight of the machine: 400kg. 

-If you want to lift the machine with a crane, you must protect the contact 

areas of the slings with the framework in order to avoid scratches and distortions. 

Содержание TFS100






















































































Отзывы:

Нет отзывов