62
HYDRAULIC WINDSHIELD SYSTEM HWS
According to international standards, high
quality fluids should be used.
-
Hydraulic fluid: HLP-32
Hydraulic fluid Change:
-
Should be done every 2000-3000 working
hours or once a year.
-
It is recommended to clean the bottom of the
fluid tank every time the hydraulic fluid is
changed. It is not recommended to mix
different types of hydraulic fluid.
NOTE: For further information consult the “User Guide
– Hydraulic Elevation System HWS-RKS”
6.3.4.
INSPECTION INSTRUCTIONS FOR COMPONENTS
WITH CE MARKING OF ULMA CONSTRUCTION
Check the condition of the mentioned parts prior to
each use. For more information, consult ULMA
Construction.
The lifting appliance Lifting Hook MK (1991360), must
be checked before each use to confirm the good
working condition of the following parts:
COMPONENT /
FEATURE TO
CHECK
CORRECT WORKING
CONDITION
Ring
Without
deflection
nor
excessive wear
Square bar
Without deflection
Bolt
Without deflection
ID plate
Existing and readable
If the lifting appliance does not fulfil all defined
requirements, it must be removed from service.
6.3.5.
INSPECTION INSTRUCTIONS WITH CE MARKING
OF
EQUIPMENT
MARKETED
BY
ULMA
CONSTRUCTION
Equipment with CE marking marketed by ULMA
Construction is checked following the instructions
stipulated in the “User´s Guide of the respective
product”.