21
HYDRAULIC WINDSHIELD SYSTEM HWS
SLAB BRACKET LT HWS
This bracket is used for fixing the system on slabs of the
building structure.
It is fixed directly to the cone that is fixed vertically at
the slab with a “Bolt M24x140”.
The bracket provides 2 regulations systems to correct
possible errors during positioning process of the cones
embedded in the concrete.
LONGITUDINAL REGULATION system:
The longitudinal regulation is done by changing the
assemble of the “Ring with dovetail” of the “Slab
Bracket”. Allows placing the bracket
102.5mm spaced
from the “neutral position” (correct position).
In the following pictures is shown how changing the
“Ring” assemble, the position of the HWS set is always
100mm distanced from the slab and the position of the
cone varies, absorbing the longitudinal errors.
Changing the position of the “Ring” from one hole to
the next one
62.5mm regulation is achieved:
The “dovetail” of the “ring” allows a more accurate
regulation (20mm per each tooth):
Position -2
Position 0
P2
40mm to the right
40mm to the left
MINIMUM 5 teeth of overlap is required.
Use these regulation systems ONLY in
“exceptional cases”, because of a bad “punctual
positioning” of the cone. Usually, the “Slab Bracket” is
going to be assembled at its “Neutral Position”
Slab Bracket LT HWS
(1991171)
Bolt M24x140 DIN931-8.8
(0242414)
Do not weld anchorage components because of the risk
of fractures.
Ensure the full threaded of the rod on the cone and fix
anchor.
Neutral Position
650mm
100mm
587,5mm
100mm
Ring Fixed 62.5mm
to the left
712,5mm
100mm
Ring Fixed 62.5mm
to the right