19
HYDRAULIC WINDSHIELD SYSTEM HWS
2.2.4.
ANCHORS LT HWS
The main function of the anchor brackets in the system
is guiding and supporting the HWS Windshield Sets.
The anchoring system is made up of 2 independent
parts:
HEAD LT HWS
: main part of the anchoring system
that contains the mechanisms for guiding (by means
of detachable
Claws
) and the support for the
climbing set (
Pawl
).
BRACKET LT:
element of the anchoring system to fix
onto the slab or onto the wall.
The “
Head LT HWS”
is connected to the “
Bracket LT”
,
thereby linking the windshield to the slab or wall of the
building structure
This is the SLAB anchoring system:
This is the WALL anchoring system:
HEAD LT HWS
This is the anchoring part, which contains the support
(Pawl) and the guiding mechanisms (Claws) for
“Windshield Sets”. As mentioned before, depending on
the jobsite’s application requirements, this head will be
assembled in the suitable bracket by means of a
“bracket connection”.
The “
Pawl”
is the part where the whole climbing
structure rests. Its main function is to allow the
movement of the “S
elf-Climbing Blocks
LT HWS”
upwards being completely blocked on the way down.
Slab Bracket LT HWS
(1991171)
Head LT HWS
(1991169)
Wall Bracket LT HWS
(1991190)
Head LT HWS
(1991169)
Claws
Pawl
Double
Pin
Cylinder
Connection Pin
Bracket
Connection
Handle
Pawl Locking Hole
Head LT
HWS
(1991169)
WORKING
Position
BLOCK PASSING
Position
Mast wings guided
by claws
Mast
Block
Introduce a bar to lock the “Pawl”
at “Block Passing Position”