Ulma HWS Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 66

Ulma HWS Скачать руководство пользователя страница 42

42




HYDRAULIC WINDSHIELD SYSTEM HWS

Before any system lifting, the following instructions must be taken into account:



Ensure that all contact surfaces between masts and climbing heads are clean and greased in order to ease the

movement between them.



Supervise that every hydraulic connection is correct.



Verify that the “Self Climbing Block LT HWS” are correctly positioned, oriented and the distance between them

is the required one.



Verify that the structure to be lifted does not put in danger any person nearby.



Verify that the structure to be lifted will not interfere with any object during the climbing process and does not

snag with any possible existing structure nearby.



Ensure that all lateral accesses to platforms are closed avoiding any accidental fall.



Worker assistance is required at all times during lifting movements in order to have cylinders, brackets and HWS

Heads under control and act on them when necessary.



Workers must know and control that every climbing step described is correctly carried out.



In case of “Slab Bracket LT HWS”, fix it with a push-pull prop at the “Head LT HWS” side. In case of lack of upper

slab, use a “Piece of Wood” at the rear part of the bracket (See point 2.2.4 “Slab Bracket LT HWS”)

«
...
40
41
42
43
44
...
»

Содержание HWS



































































Отзывы:

Нет отзывов